The Cooper-Atkins DPP400W-0-8 pen-style dual-range digital thermometer is used for monitoring temperature in food service applications. It measures temperature from -40 to +392 degree Fahrenheit (-40 to +200 degree Celsius), with an accuracy of + or – 2 degree Fahrenheit from 14 to 212 degree Fahrenheit and + or – 3 degree Fahrenheit outside this range. Its stainless-steel stem-style probe is 2.75 inch long and has a thermistor sensor in the reduced penetration tip for taking measurements while immersed in liquid or air. It has minimum or maximum temperature memory and hold modes to retain high and low readings. The ABS (acrylonitrile butadiene styrene) plastic housing material has an anti-microbial additive to help deter bacterial growth. The unit operates on a single 1.5V battery and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. It is ingress protection certified to IPX7 for protection against immersion in water up to 1 meter. The NSF (National Sanitation Foundation) listing indicates compliance with applicable safety standards and the European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. It comes with a protective sheath with pocket clip, a battery and instructions. Temperature measurement range -40 to +392 degree Fahrenheit (-40 to +200 degree Celsius). Resolution From -40 to +199 degree Fahrenheit: 0.1 degree Fahrenheit. From 200 to 392 degree Fahrenheit, 1 degree Fahrenheit. 0.1 degree Celsius throughout the entire range. Accuracy + or – 2 degree Fahrenheit from 14 to 212 degree Fahrenheit (1 degree Celsius from -10 to +100 degree Celsius) and + or – 3 degree Fahrenheit (1.5 degree Celsius) outside this range. Response time less than 6 seconds. LCD size 0.25 x 0.8125 inches (6.4 x 20.6 millimeter) (H x W). IP rating IPX7. Standards met NSF, CE, RoHS, WEEE. Power supply 1.5V battery. Weight 0.9oz. Dimensions with sheath 6 x 3 or 4 x 5 or 8 inches (152.4 x 19 x 15.8 millimeter) (H x W x D). H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Digital thermometers are instruments used to measure the temperature of air, liquids or surfaces electronically. They may measure temperature in Celsius, Fahrenheit or both. Most digital thermometers use thermistors, which are small electronic resistors made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A micro controller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage and in doctors offices and hospitals. Cooper-Atkins manufactures time, temperature and humidity instruments for industrial, HVAC or R, health care and food safety applications. The company, founded in 1884, is headquartered in Middlefield, CT.
Measures temperature from -40 to +392 degrees Fahrenheit -40 to +200 degrees Celsius, with an accuracy of + or – 2 degrees Fahrenheit from 14 to 212 degrees Fahrenheit and + or – 3 degrees Fahrenheit outside this range
Stainless-steel stem-style probe is 2.75 inch long and has a thermistor sensor in the reduced penetration tip for taking measurements while immersed in liquid or air
Minimum or maximum temperature memory and hold modes retain high and low readings
Certified to IPX7 for protection against water up to 1 meter